Home » 2021 » November

Monthly Archives: November 2021

New California Law Requires Use of ‘Lead-Free’ Plumbing Fixtures

ONTARIO, CA — A new plumbing code signed into law in California will mandate strict new limits on the manufacturing and sale of plumbing fixtures that leach lead, a toxin that has been tied for decades to drinking water, state officials announced.

California Gov. Gavin Newsom last week signed into law AB 100, legislation that establishes new lead leaching standards for the state, according to the International Association of Plumbing and Mechanical Officials (IAPMO), an organization that coordinates the development and adaptation of plumbing, mechanical, swimming pool and solar energy codes in the U.S. and abroad.

The new law, effective Jan. 1, 2023, prohibits the manufacturing and sale in California of any plumbing fixture, fitting or faucet that does not meet NSF/ANSI/CAN 61-2020, the IAPMO said. The law also requires that product packaging and labeling of any device that’s intended to convey or dispense water for human consumption must indicate compliance with the “lead-free” standard.

“AB 100 will help reduce the risk of lead exposure in the built environment through certified, ‘lead-free’ endpoint devices,” said Robyn Fischer, director of government relations for the Ontario, CA-based IAPMO. “This new law will complement the larger-scale efforts underway to help protect California’s water infrastructure and underscores the state’s commitment to uphold public health and safety.”

“We’re grateful that California’s new law promotes the industry standard for lead reduction, so that drinking water fixtures and faucets are accurately labeled,” added Tom Palkon, IAPMO’s executive v.p.

The post New California Law Requires Use of ‘Lead-Free’ Plumbing Fixtures appeared first on Kitchen & Bath Design News.

Did you miss our previous article…
https://www.culturekitchen.net/?p=612

MSI Acquires GA Vinyl Tile Supplier

ORANGE, CA — MSI, the Orange, CA-based supplier of flooring, countertops, wall tile and related products, has acquired ROKplank, the manufacturer of Rigid Core Luxury Vinyl Tile, the company announced.

The factory, located in Cartersville, GA, will operate under the name Premium LVT Manufacturing, MSI officials said.

“MSI is excited about our acquisition of ROKplank,” said company President Raj Shah. “This will enable MSI to domestically manufacture Everlife LVT (and) with the exponential growth in demand of LVT coupled with industry-wide supply-chain challenges, the factory will give us a base to even better serve our customers.”

The post MSI Acquires GA Vinyl Tile Supplier appeared first on Kitchen & Bath Design News.

SEN Design Expands Educational Access

CHARLOTTE, NC — SEN Design Group, the Charlotte, NC-based kitchen and bath industry buying group and business education resource, has revamped its membership structure to increase access to business education opportunities for industry professionals, the organization announced.

“Under our previous structure, the majority of our educational opportunities were add-on expenses for our members, but we wanted to make sure our members had access to as much educational content as they wanted without added expense, so we have updated our membership structure to provide this much-needed resource at a minimal monthly investment,” said Catherine Daugherty, director of membership at SEN Design Group.

SEN Design Group will now offer three tiers of membership with differing benefits based on the member’s specific needs:

Associate Membership includes basic access to industry-specific business and sales education opportunities; this level is targeted for industry firms and independent designers who may not want to participate in a buying group or attend semi-annual conferences.

Signature U Membership includes increased access to industry-specific business and sales education opportunities, as well as access to SEN Design Group’s purchasing power and networking community.

Executive U Membership ($399 per month) includes everything in the Signature U Membership with additional benefits for industry leaders, such as dealer roundtables, a business development manual, personal profiling assessments for better hiring and communication, maximum quarterly rebates and more.

Additional details are available at www.sendesigngroup.com.

The post SEN Design Expands Educational Access appeared first on Kitchen & Bath Design News.

Did you miss our previous article…
https://www.culturekitchen.net/?p=606

LX Hausys Unveils New Brand Identities

CHICAGO — LX Hausys America Inc. unveiled new brand identities for its  HIMACS Solid Surface and Viatera Quartz Surface brands, and a new brand identity for its resilient floorcovering line of products, HFLOR, at the recently held NeoCon. The new brand identities reflect the company’s name change this summer from LG Hausys America to LX Hausys America.

The new name is a result of the company’s position within the recently established LX Holdings Corp. The holding company is a globally diversified organization recently spun off from LG Group, the South Korean multinational conglomerate best known for its advanced consumer electronics.

Concurrent with the name change, the company introduced a new logo. It pays homage to the company’s roots, looks to the future and embodies the organization’s management philosophy: “Link to a sustainable future.” Of significance, the “X” within the LX Hausys logo is intersected with an ascending diagonal line, which is a visual representation of the company accelerating into the future, notes the firm.

An ascending diagonal line is now found within each brand logo. This subtle design treatment creates a unified look between the company and its three brands, the company continues. It also ensures the company’s mission for creating a more sustainable future is consistently visually represented across its portfolio of brands.

The post LX Hausys Unveils New Brand Identities appeared first on Kitchen & Bath Design News.

Did you miss our previous article…
https://www.culturekitchen.net/?p=603

Creating an Elegant Waterfront Dream

Hicksville, NY — Sometimes, some of the best projects start with a complex story. Such was the case with this recent renovation, which involved a tear down and rebuild of the Northport, NY home sited on the shores of Long Island Sound.

The homeowner and builder (Jato Builders) had visited several firms looking for a collaborative kitchen designer who could help bring to fruition the client’s vision for an elegant residence with a coastal design vibe.

“She’s very particular and she just wasn’t making a connection with anyone,” recalls Ellen Lopez, CMKBD/founder/principal designer, EL Design Studio, in Hicksville, NY. “That’s when I received a phone call from a friend and fellow designer who asked if I would be interested in the project. The homeowner came to my studio and we hit it off immediately.”

Focus on the Waterfront

One of the challenges in finding the right designer was finding someone who could navigate the challenges associated with the relatively large space and the homeowner’s wishes. Specifically, she wanted a kitchen that was unique – i.e., nothing ‘cookie cutter’ – with a functional layout. She also wanted a focus on the waterfront and elegant materials and finishes – including those that would play off of the reflective and shimmery chandelier she had already selected to float above the adjacent eating area.

Lopez’s client wanted a design that included elegant materials and finishes – including those that would play off of the reflective and shimmery chandelier she had already selected to float above the adjacent eating area. The breathtaking vista of the Long Island Sound played a significant role in the kitchen’s design.

“The whole design concept actually started with the light fixture,” she says. “We wanted to keep everything elegant to live up to it, yet keep it toned down a bit so it wouldn’t be overpowering.”

The breathtaking vista of the Long Island Sound also played a significant role in the design.

“The view is the focal point,” she relates, adding that the home’s location is very peaceful and serene. “We didn’t want to detract from it.”

To accommodate, a wall of windows and patio doors with transoms and arched mullions stretch the length of the kitchen and into the adjacent dining room. The color palette and material selection also pay homage to the view.

“We wanted to bring the North Shore of Long Island’s color palette into the house, which we achieved with a variety of materials and wood tones,” Lopez explains. The resulting mix of soft, natural tones is accentuated with a perfect balance of accent colors to provide definition and detail.

For example, Cambria Skara Brae quartz countertops and accent walls, which are tucked behind wooden floating shelves, feature dramatic earth-toned veins set against a bone white background that draw the eye around the room and capture the ebb and flow of the water beyond the windows. Its light and dark tones are repeated in the custom EL Design Studio cabinetry, which is accented with Rocky Mountain Hardware and walnut interiors. The former color tone is represented by the perimeter cabinets and the latter is echoed in the island, which is sheathed in a custom finish that reflects the colors and textures of rocks and pebbles outside. To visually minimize its large dimension, Lopez topped the island with a combination of quartz and custom-figured maple. The wood, from Grothouse, is stained dark and rich to add elegance, depth and strength.

“In a sense, the combination of materials tricks the eye,” she states, adding that elevating the wood eases the transition between the surfaces and gives the wood an impressive and stately appearance. “I didn’t want just one giant piece of stone. Instead, the mix of materials, and the light versus dark, is more interesting and inviting.”

Lopez incorporated plenty of seating, a prep sink and the Thermador range into the island. Hovering above, the ventilation hood – built collectively by Birchcraft Kitchens and Grothouse – also includes antiqued mirrors that reflect the water.

The Importance of Work Flow

Because Lopez’s client loves to cook, creating a functional layout was critical…and challenging, given the fact that she had an extensive appliance wish list that included two wall ovens and a 36″ range, two dishwashers, a microwave drawer and a built-in coffee machine. Plus, she wanted a walk-in pantry with entry provided from within the kitchen.

Lopez accented the pantry door with antiqued mirrors to add interest. Plus, the mirror offers a reflection of the water. Inside, the designer included several unexpected details, including glass/wire mesh upper cabinets, open shelves and a wood countertop.

“It took three iterations to find the perfect layout that established a good work flow in an aesthetically pleasing space,” she indicates.

With one wall dedicated to the view, and therefore unavailable for wall or tall cabinetry, the designer focused on creating rhythm and flow with a small work triangle consisting of the Kohler Whitehaven Cashmere farmhouse sink and Thermador range and refrigerator. Tucked within is the Miele coffee machine and a Thermador microwave drawer.

A separate Thermador column freezer is a few steps away on the opposite side of the arched entrance into the great room. Turning the corner, Lopez placed two additional ovens. Across from another arched entrance, this time into the formal dining room, she included a television, countertop with additional storage and the entrance into the hidden pantry, which sits behind the wall. To add interest, Lopez accented the door with antiqued mirrors.

“I created the entry to look like a tall cabinet, rather than a door,” she explains. “Plus, the mirror offers a reflection of the water so everyone, including those seated at the nearby banquette with their backs to the window, can see the view.”

Inside the pantry, Lopez included several unexpected details, including glass/wire mesh upper cabinets, open shelves and another Grothouse wood countertop. ▪

The post Creating an Elegant Waterfront Dream appeared first on Kitchen & Bath Design News.

Did you miss our previous article…
https://www.culturekitchen.net/?p=598

Manufacturers Examine Supply Stresses

The DPH manufacturer concentrates on quality product and superior customer service. We are expected to provide both at competitive prices and with as little friction as possible, and I would say, most of us do. However, as we’ve witnessed the ‘Amazoning’ of the marketplace, amplified by a pandemic world, DPH manufacturers are fighting to maintain stability between logical expectations and ‘the Amazon effect.’ While we all appreciate the convenience of an Amazon marketplace, not all products can be treated equally. Unlike some other industries, hardware, plumbing, appliances and lighting often have specific shipping, installation and service needs.

Manufacturers are often viewed simply as marketers and salespeople, but as you may have seen when visiting a factory, manufacturing is a multi-faceted and complex business. Manufacturers in the U.S. and around the world are more tightly bound together through raw materials, labor and freight than may appear from a finished product.

TIES THAT BIND

Raw Materials: These are tied to industries as varied as oil and microchips. Most can be, and are, sourced nationally, but some must be sourced internationally. The flow of these products is regulated by countries, politics and commerce vagaries all around the world. In a normal year, price increases are expected and applied where necessary. In a COVID year, price increases have been compounded by national and worldwide slowdowns in supply, and increases are reflecting the upheaval.

Ben Alliker of HamatUSA explains, “2020 was not kind to many parts of the construction industry, mainly due to increased demand and decreased supply. Appliances and lumber both faced an initial crunch, and appliances remain on short supply and long lead times. For many DPH manufacturers, it was a mixed bag. Kitchen products, unlike a shower valve or new freestanding tub filler, don’t require an extensive remodel project. It’s relatively easy to install a new kitchen sink and faucet into an existing kitchen. Because of a huge number of people staying home across the world, and the relative ease of installation, HamatUSA saw a huge spike in demand over the summer and into the fall for kitchen sinks and faucets – both in the U.S. and in foreign markets.”

Production and Inventory: For manufacturers, this is handled in a wide variety of ways. That is to say some manufacturers work on a made-to-order, just-in-time basis with very little inventory, while others continually produce and maintain large inventories. There are pros and cons to both, but both take deft skills to balance output with demand and costs with profit.

Freight Costs: Costs associated with shipping have skyrocketed. The freight industry has been working throughout the pandemic, putting themselves at risk, but also realizing their undeniable necessity to the buying public. Their charges are reflecting their increased importance. ‘Fuel surcharges’ have become more common. Most DPH manufacturers have decided to keep freight rates as stable as possible, absorb many increases and/or set free freight levels.

LABOR AND SERVICE

Returns and Restocks: There is no easy fix for returns and restocks, which have become a flash point. We know, stuff happens. We all want to make these transactions as painless as possible. However, returns in our segment are not as easy as logging on and printing off a return label or simply scanning a QR code. Returns and restocks are expensive for everyone and cannot be ‘solved’ by simply raising prices to try and speed up the process. The customer changed their mind? It happens. But a faucet, toilet, steam unit, drain or tub cannot simply be Rambo-taped back into its packaging and dropped off. Return transport, reception and inspection, repair (if necessary), repacking (if possible) and return to inventory are only a few of the things that need to happen to a return. But, let’s be honest. We all know that a consumer wants a new product, so reselling product is difficult and frowned upon. What can be done with returned goods in our industry? How many ways are there to reduce, reuse, recycle? Manufacturers are often caught in a difficult position to satisfy consumers even when issues are not manufacturing related.

“Absorbing the costs associated with returns would most likely come with a price increase,” says Barbara Kratus of Infinity Drain. “Ultimately, it’s the consumer who will pay for it in the end, whether it’s Prime delivery or no-questions-asked returns – just as they do now on Amazon or any other online retailer where it’s baked into the price.”

Harris Wattles of Amba Products adds, “Re-stock fees are put into place for a variety of reasons, and a price increase simply to help offset a reduction/elimination of restock fees is not the answer to the problem. Increasing our prices for this reason will only make it harder to compete with other brands, especially the low-cost companies that you frequently see on Amazon, further eroding a company’s image while likely pricing our products out of the market.”

Labor Costs: In manufacturing, these are more competitive than ever. Recruiting, hiring and retaining the best people at every position is not exclusively difficult to showrooms or agencies. Most jobs in DPH manufacturing are not on assembly lines, but rather require trade training or artistic skill.

“Production facilities (during COVID) had less time/resources available for new product production. As responsible suppliers, we had to initiate protocols to keep production teams safe and healthy,” Alliker explains. “That universally meant less people in the factory at one time, and different production schedules, and thus decreased production capacity. We have seen COVID-related delays to the supply chain for new components as they also deal with COVID realities.”

Service: This is the other main component to successful manufacturing. We all remember bad service when we encounter it, and good service doesn’t always get recognized but is expected at all levels. Good service can be a simple smiling voice or a clear instruction about how to turn something on and off. Good service to a consumer can be slowly walking through how to operate a control, or good service can become bad service by not changing out that same control, that is working properly, because the user doesn’t like how the control operates. There is a fine line between the customer always being right and easy, on-site solutions.

Labor Costs: These are now jungle competitive in the field. Skilled tradespeople have never been as busy as they are now. Product support for warranty issues or installation inspections is a critical component in the overall experience of a product offering. Your warranty can be 100 years, but if you can’t get a professional to a job site, it’s not worth much. And we are all dependent upon how professional and experienced the tradesperson working with us can be during the initial installation or follow up servicing.

“I think products that incorporate tech could inspire young people to enter the trades,” says Kratus. “There are incredible innovations in building materials! We have to tout that at all levels of the building process.”

Patrick Weidl of ThermaSol adds, “ThermaSol, like many of us, is reliant on two trades – plumbers and electricians – to install the products. Have their expectations changed? Yes, absolutely. To meet those expectations, we introduced virtual trainings as it relates to product knowledge, installation and general 101s.”

The web runs the world. It would be an understatement to say that the web has gotten us through a lot this past year and we have all learned new angles to using it. It has become indispensable to our everyday lives. You can order a car, a boat, a diamond necklace, your groceries, birdfeed, a towel bar or a potty, all from the phone in your hand.

But as we all know, the web is a catch-22 for everyone selling product, any product, around the world. Amazon and similar companies ruled the web pre-COVID but now all companies have improved their online presence either as a seller or simply as a store window showing off their skills and products. Today, if your store front isn’t well represented on the web, your brick and mortar isn’t going to get the attention it deserves.  We’ve all become accustomed to checking out a product or business on the web before we head out to see it. A web search can be simply to see what kind of COVID protocols are in place or to actually see if the product you want is on display or to read reviews of that product or business. 

Web views and reviews are, without a doubt, a crucial component to the future of business.  We’ve seen how reviews shape the perception of a product or company and how reviewers, paid and unpaid, can affect mom and pop start-ups, large corporations and government agencies, to name a few. The world watches and reads what everyone has to say about a product whether what is being said is true or valuable. They can literally make or break a business. So, we ask, should we raise our prices to be more ‘Amazon-like’?

It’s been a challenging time for all, but the future of construction and renovation is bright, and we are hopeful.

Kimberly Frechette is the national sales manager at Americh Corporation. She has worked in manufacturing, distribution and sales in the bathroom segment for 30 years. Frechette has been involved with DPHA for 18 years and is a returning Board member.

The post Manufacturers Examine Supply Stresses appeared first on Kitchen & Bath Design News.

Did you miss our previous article…
https://www.culturekitchen.net/?p=595

5 Reasons on Why You Should Say “YES” to Quartz

Quartz has surged in popularity with homeowners throughout the last decade. When faced with the tough decision of quartz or granite countertops, many remodeling customers have chosen quartz for their material of choice. Picking your countertop material is one more thing to add to the list of choices needing to be made when faced with a kitchen remodel. Listed below are 5 reasons why quartz has been the primary choice amongst homeowners. Quartz is not just a fleeting trend, it’s here to stay in the remodeling world!

Manufactured Material

Quartz is a manufactured material. This engineered stone is first found as a common mineral mined from the Earth. Quartz is then processed and fused with resin binders under intense heat and pressure to form a solid slab. From there, pigments are added to the countertop to give you the presentation which appears in your home. Since this material is manufactured, it allows for a wide variety of colors and design. Quartz can be made to have a uniformed appearance ensuring consistency in your remodeling design.

Durability

Quartz is also a highly durable material which can easily withstand the day-to-day wear and tear being in a kitchen presents. On the Mohs scale of mineral hardness, this material is rated a 7 out of 10. And along with durability, quartz is also resistant to cracks. The kitchen is the place where creativity and mastery truly present themselves. You don’t want to hold back your culinary skills out of fear of damaging your workspace. Quartz provides you with that safety net ensuring your kitchen is functional and aesthetic.

Non-Porous

Quartz, being the low maintenance material it is, resists staining like a professional. Yes, that’s right. Quartz can hold its own against wine, oil, and any other types of spillage. Messes happen quite frequently in a kitchen, and with quartz there’s no need to worry you’ve seriously damaged your beautiful countertops. Since quartz is a non-porous material, it’s also bacteria resistant allowing for safer and more cleanly workspaces.

Warranty

Quartz’s quality is constantly being backed up and cemented by its manufacturers. These places of production have so much faith in their quartz products, they often offer generous warranties along with your quartz purchases. Quartz warranties are normally around 15-25 years.

Versatility

Finally, quartz is a highly versatile material. Yes, it looks amazing in a kitchen, but due to its durability and endless engineered options quartz is fantastic for all places. It has endless applications. Looking for a bathroom countertop, a newly renovated bar space, or any other place in your home, quartz is the choice for you.

Kitchen Solvers

At Kitchen Solvers, we want to ensure that you, the homeowner, protect and preserve your beautiful kitchen space. Making sure your kitchen continues to take your breath away is part of our job at Kitchen Solvers. Whether you need storage solutions, an upgraded kitchen with cabinet refacing, or want to start from scratch with a whole new kitchen remodel, we will provide you with the most pleasant remodeling experience.

Also, be sure to check out our blog articles, Affordable Kitchen Countertops and Tips for Remodeling a Kitchen on a Budget.

The post 5 Reasons on Why You Should Say “YES” to Quartz appeared first on Kitchen Solvers.

Kitchen of the Month Winner for New Cabinets for April

Kitchen Inspiration by Kitchen Solvers of the Gulf Coast

Project Location: Clearwater, FL

Remodel Style: Transitional

Remodel Type: New Cabinets

Type of door style: Shaker

Color: White for Perimeter; Grey for Island

Countertop: Quartz

Countertop Color: Silestone Pearl Jasmine

Backsplash: Herringbone Mosaic

For more information about this project, please visit Kitchen Solvers of Gulf Coast’s Blog.

Find a location near you. 

The post Kitchen of the Month Winner for New Cabinets for April appeared first on Kitchen Solvers.

Did you miss our previous article…
https://www.culturekitchen.net/?p=586

Spotlight Kitchens of July – New Cabinetry

  • Project Location: Clearwater, FL
  • Remodel type: New Cabinetry
  • Type of door style: Mission
  • Remodel style: Transitional
  • Color: Koala
  • Countertop: Cambria
  • Countertop color: Ironsbridge
  • Backsplash: Tile backsplash in Literati Irving

For more information about this project, please visit Kitchen Solvers of the Gulf Coast’s Gallery page.

  • Project Location: Seminole, FL
  • Remodel type: New Cabinetry
  • Type of door style: Shaker
  • Remodel style: Transitional
  • Color: White
  • Countertop: Silestone
  • Countertop color: Eternal Calacatta Gold
  • Backsplash: Silestone Eternal Calacatta Gold

For more information about this project, please visit Kitchen Solvers of the Gulf Coast’s Gallery page.

  • Project Location: La Crosse, WI
  • Remodel type: New Cabinetry
  • Type of door style: Mission
  • Remodel style: Contemporary
  • Color: Ebony
  • Door Material: Cherry
  • Countertop: Hanstone Quartz
  • Countertop color: Montauk
  • Backsplash: Hanstone Quartz full-height

 For more information about this project, please visit Kitchen Solvers of La Crosse’s Gallery page.

  • Project Location: Belleair, FL
  • Remodel type: New Cabinetry
  • Type of door style: Maui
  • Remodel style: Transitional
  • Color: Polar White
  • Countertop: Silestone
  • Countertop color: Pearl Jasmine

For more information about this project, please visit Kitchen Solvers of the Gulf Coast’s Gallery page.

The post Spotlight Kitchens of July – New Cabinetry appeared first on Kitchen Solvers.

Spotlight Kitchens of July – Cabinet Refacing

  • Project Location: Clearwater, FL
  • Remodel type: Cabinet Refacing
  • Type of door style: Shaker Bevel
  • Remodel style: Transitional
  • Color: Aloe
  • Countertop: Granite
  • Countertop color: Silver Stratus
  • Backsplash: Glass mosaic tile

For more information about this project, please visit Kitchen Solvers of the Gulf Coast’s Gallery page.

  • Project Location: Seminole, FL
  • Remodel type: Cabinet Refacing
  • Type of door style: Shaker
  • Remodel style: Modern
  • Color: Ash White
  • Countertop: Quartz
  • Countertop color: Pleione Polished

For more information about this project, please visit Kitchen Solvers of the Gulf Coast’s Gallery page.

  • Project Location: Grayslake, IL
  • Remodel type: Cabinet Refacing
  • Type of door style: Square Lancaster
  • Remodel style: Transitional
  • Color: Midnight Super Matte for uppers and Gibraltar for the lower cabinets

For more information about this project, please visit Kitchen Solvers of Grayslake’s Gallery page.

  • Project Location: Menomonie, WI
  • Remodel type: Cabinet Refacing
  • Type of door style: Mission
  • Remodel style: Modern
  • Color: White
  • Countertop: Cambria
  • Countertop Color: Brittanica
  • Backsplash: 3×6 white subway tile

For more information about this project, please visit Kitchen Solvers of Eau Claire’s Gallery page.

  • Project Location: Hollywood, FL
  • Remodel type: Cabinet Refacing
  • Type of door style: Elegante II
  • Remodel style: Modern
  • Color: Wired Mercury
  • Countertop: Quartz
  • Countertop color: Compac Unique Calacatta
  • Backsplash: Laminate Refacing Wired Mercury

For more information about this project, please visit Kitchen Solvers of Fort Lauderdale’s Gallery page.

The post Spotlight Kitchens of July – Cabinet Refacing appeared first on Kitchen Solvers.